You can't do it straight from flash to flash, because it will give you a message saying "Device in exclusive use", you can use tftp as well, its just that ftp is much faster.Īlso, the standard flash size is 16Mb, so you might want to increase that.
I have installed an older version to go with 12.4.15T on a 3725. If CME would be a car, it would be a Tata Nano. I find better than running 2 or more softphones on a single laptop.ĬME and GNS3 For the record, I don't like CME, I actually avoid it like the plague. I use this so I can actually run multiple softphones on different physical machines. This, combined with adding static routes in your home network to point to the GNS3 subnets, should allow you to connect to GNS3 from any machine. HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Tcpip\Parameters and set the IPEnableRouter value to "1", and then reboot. This is quite easy to set up and for this you will need to ebale IP routing in the registry (again using Win7 64bit). There is a huge overlap between the two though, so why would you choose one over the other, and more importantly (for me at least), which will I need to use for what in the exam ACS is actually at the end of its life, the last day to order 5. The way to do this is to have the laptop perform routing between your home network and GNS3. The CCIE Security syllabus lists both the ACS and the ISE for the lab. To add to this, I have connected my home network subnet to GNS3 through the same loopback interface as described above.
Please also remember that if you expand your GNS3 subnets beyond the direct connected subnet of the loopback interface, you will need to add static routes to your laptop or desktop (and change your proxy setting exlcusions to include these networks).
0 kommentar(er)
